H Type Modular Chiller

· Capacity range~30~2080kW Modular design, Flexible combination.

· Up to 16 units can be combined in one system.

When one module of the combination is faulty or maintained, the other modules run normally.

Automatically setting priority open compressor and priority open module, balancing the running time, ensure that running time is the same, prolong the service life of the unit. 

If some problem happen to one system, the other part can still operate normally. When the load is low, only one system is applied, the energy efficiency is higher.

· Thread design, the inner surface is groove-like, more fully in contact with the refrigerant, better heat exchange effect.

· Using high efficient corrosion hydrophilic aluminum fin, not easy to frost, increase the speed of the condense/frost water flow, increase the heat exchange efficiency 10%, also enhance the corrosion resistance and oxidation resistance.

* The data from the AUX air conditioning laboratory center, the parameters in the table is the nominal value of the rated working conditions, it will be vary with the difference of working conditions, environment, regional differences, the specific experimental environment are measured by AUX, including cooling capacity, heating, power, noise, air supply, etc.

* Due to product iteration and upgrading, the above design and specifications are subject to change without notice, and the final specifications are subject to the technical specifications which provided by the sales representative.